S1280G Ride on Floor Sweeper

S1280G Ride on Floor Sweeper

$4,999.00
$4,999.00

Shipping and Delivery

Order now, get it before Oct 29, 2026

Tax included, Free shipping on order $99+

Free Fast-Delivery Upgrade** This limited time offer is only available on selected in-stock items. Expedited delivery is not available for island addresses and remote areas. Island addresses and remote areas or orders containing more than 2 batteries will be shipped via standard delivery.

14-Day ReturnsEasy shopping with hassle-free returns and replacements. *Some products have special return and replacement policies. Please refer to the information on the corresponding product detail page.

Product Information

Product Information

51" SWEEPING PATH WITH DUAL SIDE BRUSHES: The KARHDIR S1280 Ride-On Floor Sweeper combines a 51-inch sweeping path with one 19.3-inch main brush and two 19.7-inch side brushes. The side brushes move debris away from edges and toward the central sweeping path for efficient collection.

UP TO 92,600 SQ. FT. PER HOUR: With theoretical sweeping productivity of up to 92,600 square feet per hour, the S1280 helps reduce the time and labor required to maintain warehouses, factories, parking areas, commercial facilities and other large spaces. Actual productivity may vary according to surface conditions, debris levels, obstacles and operating speed.

27-GALLON STAINLESS STEEL HOPPER: The 26.4-gallon debris hopper provides substantial capacity for dust, leaves, sand and other loose material. Its stainless steel construction resists corrosion and everyday wear, while the manual dumping design allows collected debris to be emptied after sweeping.

OVERTHROW SWEEPING SYSTEM: The overthrow system lifts debris over the main brush and directs it into the hopper. This design supports efficient hopper utilization and dependable collection across large commercial and industrial areas.

INTEGRATED DUST CONTROL SYSTEM: A 10.6-gallon water tank supplies the spray system to help suppress airborne dust during sweeping. The vacuum fan draws fine particles toward the cylindrical filter, while the electric filter shaker helps remove accumulated dust and maintain airflow.

48V BRUSHLESS MOTOR SYSTEM: The S1280 uses an 800W main-brush motor, a 600W drive motor and a 100W side-brush motor. Brushless motor technology supports dependable operation while reducing routine motor maintenance.

3–4 HOURS OF BATTERY RUNTIME: Four included lead-acid batteries form a 48V 58Ah power system, providing approximately 3 to 4 hours of cordless operation. The supplied off-board charger requires approximately 4 hours for charging under normal conditions.

FRONT-WHEEL STEERING & REAR-WHEEL DRIVE: The front wheel controls the steering direction, while the rear wheels provide driving power. This configuration supports stable ride-on control, with a minimum turning radius of approximately 59 inches for maneuvering through large facilities.

OPERATOR SAFETY & COMFORT FEATURES: An adjustable seat helps accommodate different operators, while the front headlight improves visibility in dim work areas. A reverse alarm, horn and parking brake support safer operation around people, vehicles and fixed equipment.

Features & Applications

Wide-Area Sweeping Performance

The two side brushes rotate debris inward from both sides of the machine. The main brush then lifts the collected material and transfers it into the 26.4-gallon hopper through the overthrow sweeping system.

This coordinated cleaning process allows the S1280 to cover a 51-inch path with each pass and reach along compatible floor edges. With theoretical productivity of up to 92,600 square feet per hour, it is designed for routine cleaning across large indoor and outdoor areas.

Pre-inspect the cleaning route and remove oversized objects, cables, straps and other materials that could become tangled around the brushes or obstruct the sweeping system.

Integrated Dust Suppression & Filtration

The onboard water spray system applies a controlled mist to help reduce airborne dust while sweeping. Its 10.6-gallon water tank supports extended use before refilling, making the system suitable for dusty warehouses, workshops, parking areas and similar environments.

Fine particles drawn in by the vacuum fan are captured by the cylindrical filter. The electric filter shaker dislodges accumulated dust from the filter surface, helping maintain airflow and consistent dust collection.

Use the filter shaker regularly according to operating conditions. Environments with fine or heavy dust may require more frequent filter cleaning.

Edge Sweeping with Dual Side Brushes

Two 19.7-inch side brushes extend the sweeping reach beyond the central main brush. They direct loose debris away from walls, curbs and floor edges toward the main sweeping path for collection.

Approach edges at a controlled speed and maintain sufficient clearance from walls, shelving, vehicles and other fixed objects. Brush contact should guide debris inward without striking or scraping nearby surfaces.

Front-Wheel Steering & Rear-Wheel Drive

The S1280 uses front-wheel steering for directional control and rear-wheel drive for forward and reverse movement. This configuration provides stable handling across large cleaning routes and supports a minimum turning radius of approximately 59 inches.

The maximum travel speed is approximately 8.7 mph. Select a safe operating speed according to floor conditions, pedestrian activity, visibility and the amount of debris present.

Slow down before turning, approaching obstacles or entering shared work areas. The machine is designed for controlled sweeping rather than high-speed travel during active cleaning.

Adjustable Ride-On Operation

The adjustable seat allows the operator to select a comfortable driving position for longer cleaning sessions. Essential driving and sweeping functions remain accessible from the seated operating position.

The front headlight supports visibility in dim warehouses, garages and early-morning or evening work areas. The horn can be used to alert nearby personnel, while the reverse alarm provides an audible warning when the machine moves backward.

Apply the parking brake whenever the machine is stopped, parked, inspected or left unattended.

Large Stainless Steel Hopper

The 26.4-gallon stainless steel hopper holds collected dust and loose debris while resisting corrosion and routine impact. Its large capacity helps reduce interruptions during wide-area sweeping.

The hopper uses a manual dumping system and does not include an automatic full-hopper indicator. Check the debris level regularly and empty the hopper before it becomes overfilled.

Do not allow collected material to exceed the hopper’s safe handling capacity. Heavy debris may need to be emptied more frequently than lightweight dust or leaves.

Battery-Powered Commercial Operation

Four lead-acid batteries provide a combined 48V 58Ah electrical system with approximately 3 to 4 hours of runtime. Cordless operation allows the machine to move freely across warehouses, factories, parking areas and other large facilities without a trailing power cable.

Use only the specified off-board charger and connect it in a dry, well-ventilated charging area. A normal charging cycle takes approximately 4 hours, although actual charging time may vary with battery condition, remaining charge and ambient temperature.

Allow the batteries to complete the recommended charging cycle and follow all battery inspection and maintenance instructions in the user manual.

Care & Maintenance

  • Empty the debris hopper after each use or before it becomes overfilled.

  • Inspect and clean the main brush and both side brushes regularly.

  • Remove string, wire, packaging straps and other wrapped material from the brushes.

  • Activate the electric filter shaker regularly during dusty operation.

  • Remove and clean the cylindrical filter according to the user manual.

  • Inspect the vacuum airflow path for accumulated dust or blockage.

  • Refill the spray tank with clean water and keep the spray nozzles free from obstruction.

  • Drain the water system before storage in freezing conditions.

  • Inspect the wheels, steering components and parking brake before operation.

  • Check that the headlight, horn and reverse alarm function correctly.

  • Charge the batteries only with the specified charger.

  • Keep the battery compartment clean, dry and well ventilated.

  • Do not spray water directly onto motors, batteries, switches or electrical components.

  • Park the machine on a flat, dry surface with the parking brake applied.

Important Use Notes

  • Inspect the sweeping area before operation and remove oversized or hazardous objects.

  • Do not collect burning material, hot ash, flammable substances or explosive dust.

  • Avoid sweeping liquids, wet sludge or materials not approved for the machine.

  • Reduce speed when turning, reversing or operating near pedestrians and obstacles.

  • Use the horn and observe the reverse alarm when working in shared areas.

  • Monitor the hopper manually because the machine does not include a full-hopper indicator.

  • Do not operate with an overfilled hopper or heavily blocked filter.

  • Use the water spray system when additional dust suppression is required.

  • Confirm that the surface is suitable for the machine’s weight and sweeping system.

  • Apply the parking brake before leaving the operator’s seat.

  • Turn off the machine and disconnect the power source before inspection or maintenance.

  • Follow all operating, charging, maintenance and safety instructions in the user manual.

Cleaning Performance

Sweeping Path 51 in
Main Brush Diameter 19.3 in
Side Brush Diameter 19.7 in
Number of Side Brushes 2
Theoretical Productivity 92,600 sq ft
Maximum Gradeability 35°
Edge Sweeping Y
Sweeping System Overthrow

Dust Control System

Hopper Capacity 27 gal
Hopper Dump Type Manual Dump
Dust Control System Water Spray System
Water Tank Capacity 10.7 gal
Vacuum Fan Y
Filter Type Cartridge Filter
Filter Cleaning System Electric Filter Shaker

Battery & Charging

Runtime 3-4 H
Main Brush Motor Power 48V/800W
Drive Motor Power 48V/600W
Side Brush Motor Power 48V/100W
Motor Type Brushless Motor
Battery Type Lead Acid Battery
Battery Voltage 48V
Battery Capacity 58AH
Number of Batteries 4
Charging Time 4 H
Charger Type Off-Board Charger

Dimensions

Machine (L × W × H) 33 × 51 × 45.3 in
Net Weight 723.2 lbs
Minimum Turning Radius 59 in
Steering Type Front-Wheel Steering
Drive Type Rear-Wheel Drive
Braking System Parking Brake
Maximum Travel Speed 14km/h
Front Wheel Size 250-75
Rear Wheel Size 300-80
Adjustable Seat Y
Front Headlight Y
Reverse Alarm Y
S1280G Ride on Floor Sweeper
S1280G Ride on Floor SweeperOrder now, get it before Oct 29, 2026
$4,999.00

  • CLEAN

    51in

    sweeping path

  • COVER

    92,600

    sq. ft. per hour

  • WORK

    3-4 hrs

    battery runtime

10.6-Gallon Water Spray System

The integrated water spray system helps suppress airborne dust while sweeping, with a 10.6-gallon water tank supporting extended operation across dusty environments.

Dual Side Brushes & Main Brush

Two 19.7-inch side brushes sweep debris inward toward the 19.3-inch main brush, creating a 51-inch sweeping path for efficient large-area cleaning.

27-Gallon Stainless Steel Hopper

The large stainless steel hopper holds up to 26.4 gallons of collected dust and debris, helping reduce interruptions for emptying during large cleaning tasks.

Comfortable Ride-On Operation

The seat slides forward or backward along dual rails, allowing operators to adjust their distance from the controls for a more comfortable working position.

Reverse Warning Light

The reverse warning light provides a visible alert when the sweeper is backing up, helping nearby personnel notice the machine in active work areas.

Controlled Maneuverability

Steering & Drive System

Front-wheel steering and rear-wheel drive support stable, controlled maneuvering with a 59-inch minimum turning radius. The wear-resistant rubber wheels, with a 250 × 75 mm front wheel and larger 300 × 80 mm rear wheels, adapt to various hard surfaces while providing durable, balanced handling during daily operation.

Incline Capability

Steady Sweeping on Inclines

The S1280G is designed to operate on slopes of up to 35°, maintaining steady movement while sweeping ramps and gently inclined surfaces. This capability allows the machine to move smoothly between level floors and sloped work areas in warehouses, parking facilities, and other commercial environments.

Dust Control

Vacuum Filtration & Electric Filter Shaker

The KARHDIR S1280G commercial ride-on floor sweeper uses a vacuum fan and cylindrical filter to capture fine dust and airborne particles during sweeping, helping reduce secondary dust across warehouses, factories, parking facilities, and other industrial cleaning areas. The electric filter shaker removes accumulated dust from the filter, helping maintain consistent airflow and simplifying routine filter maintenance.

What's in the box?

  • Karhdir S1280G

    × 1

  • Side Brush

    × 4

  • Main Brush

    × 1

  • Toothed Drive Belt

    × 2

  • Fuses

    × 6

  • Maintenance Tool Set

    × 1

  • Phillips Screwdriver

    × 1

  • 12V 58AH Bettery

    × 4

  • Use Manual

    × 1

  • Fast shipping

    Ordered a laptop and it arrived the next day. Super impressed with the speed and the careful packaging.

    Jordan Smith
    Seattle, Washington

  • Excellent service

    Customer support was helpful; they resolved my issue in minutes. Really appreciated the follow-up email to ensure satisfaction.

    Taylor Christos
    Austin, Texas

  • Great selection

    Wide variety of tech products from phones to laptops. Found everything I needed in one place, very convenient.

    Alex Williams
    London, England

  • Top quality

    The smartphone I bought exceeded my expectations. Top-notch quality, sleek design, and it came with a free case!

    Sam Davis
    San Francisco, California

  • Reliable store

    Have ordered multiple times, always received exactly what was described. Products are genuine and fully functional.

    Casey Brown
    Denver, Colorado

  • User-friendly website

    Easy to navigate and make purchases. A hassle-free shopping experience with clear descriptions and transparent pricing.

    Riley Wilson
    Boston, Massachusetts

  • Smooth checkout

    Checkout was quick and straightforward. My order confirmation came through instantly, and everything arrived exactly as expected.

    Morgan Lee
    Portland, Oregon

  • Great value

    Really pleased with the quality for the price. The product felt premium, worked perfectly out of the box, and was well packaged.

    Jamie Carter
    Manchester, England

How do I know whether I need a floor sweeper or a floor scrubber?
Choose a floor sweeper when the main problem is loose, dry debris such as dust, sand, leaves, paper fragments and small packaging waste. Choose a floor scrubber when the floor has attached dirt, stains, grease or residue that requires water and mechanical scrubbing.
Facilities with both types of soil may need to sweep first and scrub afterward.

What is the difference between a manual and ride-on floor sweeper?
A manual push sweeper uses the movement of its wheels to drive the brushes and does not require a battery. It is suitable for smaller areas and occasional cleaning.
A battery-powered walk-behind sweeper reduces physical effort and is more suitable for regular cleaning of medium-sized spaces.
A ride-on sweeper allows the operator to remain seated and is generally better for large facilities and longer cleaning shifts.

How do I choose the right sweeper size?
Start by measuring the narrowest aisle, doorway and turning area the machine must pass through. Compare those measurements with the overall machine width, not only the advertised sweeping path.
A wider sweeper can cover open floors faster, but a compact machine is often easier to use around shelving, furniture, parked vehicles and fixed equipment.

Can a floor sweeper be used on rough concrete or asphalt?
Yes. Commercial and industrial floor sweepers can be used on rough concrete and asphalt, although these surfaces may cause brushes to wear faster than smooth indoor flooring.
For machines used frequently on these surfaces for approximately two hours per cleaning session, we recommend replacing the side brushes every 60 days and the main brush every 90 days to maintain effective debris pickup and consistent cleaning results. Inspect the brushes regularly and replace them earlier if the bristles become excessively worn, uneven or damaged.

Can I use a floor sweeper on wet floors?
Moisture can clog dust filters, reduce vacuum airflow and cause debris to adhere inside the hopper. Allow the floor to dry first or use wet-cleaning equipment designed for liquid recovery.

Why is the machine width different from the sweeping path?
The sweeping path may include one or two side brushes extending beyond the main machine body. For this reason, the total cleaning width can be wider than the machine itself.
Both dimensions matter: sweeping path affects floor coverage, while machine width determines whether the sweeper can pass through doors, aisles and storage areas.

How much maintenance does a floor sweeper require?
Routine maintenance generally includes emptying the hopper, removing tangled material from the brushes, checking brush wear and cleaning the dust-control components. Powered machines may also require battery charging, filter cleaning and inspection of belts, motors and electrical connections.

When should the sweeping brushes and filter be replaced?
Replace the main brush or side brushes when the bristles become excessively worn, bent, uneven or damaged, or when they can no longer maintain proper contact with the floor. Reduced debris pickup, uncleaned strips and repeated debris being left behind may also indicate that brush replacement is needed.
Replace the filter if it is torn, deformed, permanently clogged or no longer controls dust effectively after routine cleaning. Reduced vacuum airflow or visible dust escaping from the machine may also indicate that the filter requires inspection or replacement.

Ask a Question

* Required fields cannot be left blank.