{"product_id":"c5-walk-behind-floor-scrubber","title":"C5 Walk-Behind Floor Scrubber","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e16\" CLEANING WIDTH \u0026amp; 24\" SQUEEGEE WIDTH:\u003c\/strong\u003e The KARHDIR C5 Walk Behind Floor Scrubber combines a 16-inch cleaning path with a 24-inch rear squeegee. Its compact working width is suitable for commercial floors, aisles and areas with fixed obstacles, while the wider squeegee helps collect dirty solution behind the scrub deck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUP TO 24,000 SQ. FT. PER HOUR:\u003c\/strong\u003e With theoretical cleaning productivity of up to 24,000 square feet per hour, the C5 helps reduce the time and labor required for routine hard-floor maintenance. Actual productivity may vary depending on floor conditions, obstacles, operating speed and required overlap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e18\" DISC BRUSH WITH 33.1 LB PRESSURE:\u003c\/strong\u003e The single 18-inch disc brush operates at 160 RPM and applies 33.1 pounds of brush pressure to loosen dirt, marks and residue from compatible hard surfaces. The disc-style scrub head can be used with a suitable brush or pad driver according to the floor and cleaning task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLARGE SEPARATE DUAL TANKS:\u003c\/strong\u003e A 10-gallon solution tank holds clean water or an approved cleaning solution, while the 11-gallon recovery tank stores collected wastewater. The separate tank design prevents clean solution from mixing with recovered dirty water and helps reduce interruptions for refilling and draining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e24V BATTERY-POWERED OPERATION:\u003c\/strong\u003e The included 24V 52Ah lead-acid battery provides approximately 2 to 3 hours of runtime, with a charging time of approximately 4 to 5 hours. The battery-powered design provides cordless movement across commercial cleaning areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEDICATED BRUSH \u0026amp; SUCTION MOTORS:\u003c\/strong\u003e The C5 uses a 24V\/360W brush motor to power the scrub deck and a separate 24V\/500W suction motor for wastewater recovery. Independent controls allow the operator to activate the brush and suction functions as needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVERSATILE HARD FLOOR CLEANING:\u003c\/strong\u003e The C5 is designed for flat, water-resistant hard surfaces such as concrete, tile, marble, epoxy, PVC, terrazzo and other compatible commercial flooring. Cleaning and water recovery may be less effective on deeply grooved, cracked or uneven surfaces.\u003c\/p\u003e\n\u003ch2\u003eFeatures \u0026amp; Applications\u003c\/h2\u003e\n\u003ch3\u003eOne-Pass Scrubbing \u0026amp; Water Recovery\u003c\/h3\u003e\n\u003cp\u003eClean water or an approved low-foaming cleaning solution is delivered from the solution tank to the floor. The rotating disc brush agitates the surface to loosen dirt and residue, while the rear squeegee gathers the dirty solution. The suction system then transfers the wastewater into the separate recovery tank.\u003c\/p\u003e\n\u003cp\u003eThis integrated process allows the machine to scrub and recover water in a single pass, helping reduce repeated cleaning and allowing the floor to dry faster than with conventional mopping.\u003c\/p\u003e\n\u003cp\u003eFor effective water recovery, the squeegee should maintain even contact with the floor. Deep grooves, cracked tiles and uneven surfaces may retain water and require an additional suction pass or manual drying.\u003c\/p\u003e\n\u003ch3\u003eAdjustable Solution Flow\u003c\/h3\u003e\n\u003cp\u003eThe stepless water-flow adjustment allows the operator to control the amount of solution delivered according to the floor condition and cleaning task.\u003c\/p\u003e\n\u003cp\u003eUse only as much solution as necessary to clean effectively. Reducing unnecessary water flow helps conserve clean solution, limits excess moisture on the floor and extends the working time available from each tank fill.\u003c\/p\u003e\n\u003ch3\u003eChoose the Right Brush or Floor Pad\u003c\/h3\u003e\n\u003cp\u003eDifferent floors and cleaning tasks may require different floor-contact materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUse a compatible disc brush for general cleaning and suitable textured hard floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse a compatible pad driver and floor pad for polishing, maintenance cleaning, deep scrubbing or floor stripping.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the floor pad grade according to the floor finish and required cleaning intensity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm that the brush, pad and detergent are suitable for the surface before operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTest the cleaning setup on a small, inconspicuous area before cleaning sensitive flooring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePre-sweep stones, paper, dust and other loose debris before wet scrubbing. Larger debris can become tangled around the brush or block the squeegee and suction system.\u003c\/p\u003e\n\u003ch3\u003eSimple Walk-Behind Operation\u003c\/h3\u003e\n\u003cp\u003eThe height-adjustable handle can be set to a comfortable operating position. Forward, stop and reverse functions are controlled through the operating controls, giving the operator direct control of the machine’s movement and cleaning path.\u003c\/p\u003e\n\u003cp\u003eThe walk-behind configuration is suitable for commercial floor areas, aisles and spaces with fixed equipment. Rolling-bearing wheels and a compact turning radius help the operator navigate corners and routine cleaning routes.\u003c\/p\u003e\n\u003cp\u003eThe battery-level indicator displays the remaining charge so operators can plan cleaning tasks and recharge the machine when necessary.\u003c\/p\u003e\n\u003ch3\u003eEasy Maintenance Access\u003c\/h3\u003e\n\u003cp\u003eThe recovery tank can be tilted to provide access to the battery compartment. The suction motor is mounted beneath the recovery-tank cover, allowing service personnel to reach the relevant components by opening the cover.\u003c\/p\u003e\n\u003cp\u003eThe squeegee assembly can be removed without specialized tools. When one edge of the squeegee blade becomes worn, the blade can be flipped to use the remaining edge. Replace the blade when both usable edges are worn or damaged.\u003c\/p\u003e\n\u003cp\u003eMaintenance and electrical repairs should only be performed by qualified personnel. Turn off the machine and disconnect the power source before inspection or service.\u003c\/p\u003e\n\u003ch3\u003eCare \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eEmpty and rinse the recovery tank after each use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not leave wastewater inside the recovery tank during storage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the squeegee blades and remove debris from the suction inlet.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInspect the suction hose and connections for blockage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove hair, fibers and debris wrapped around the brush or pad driver.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRaise the brush and squeegee before storing the machine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe the machine with a damp cloth and dry it afterward.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNever spray water directly onto electrical components or the suction-motor air intake.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCharge the battery only with the specified charger in a dry, well-ventilated area.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStore the machine on a flat, dry surface away from flammable materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Use Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUse the machine only on flat, compatible, water-resistant hard floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not operate the machine on slopes, rough terrain or in flammable or explosive environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePre-sweep loose debris before wet scrubbing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse only neutral, low-foaming detergent suitable for automatic floor scrubbers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not use highly corrosive, flammable or excessively foaming chemicals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMonitor the recovery-tank level and drain it before it becomes overfilled.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace appropriate warning signs around wet or detergent-treated floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep hands, feet and loose clothing away from the rotating brush.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWear closed-toe footwear during operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFollow all operating, charging, maintenance and safety instructions in the user manual.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":55540054131060,"sku":"NEB-XDJ-B40-GY-BL-001","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/3276\/1460\/files\/c5-walk-behind-floor-scrubber-8_Karhdir.jpg?v=1789113217","url":"https:\/\/karhdir.com\/products\/c5-walk-behind-floor-scrubber","provider":"My Store","version":"1.0","type":"link"}